Rick hard Rock - Lead O/S - 21/Jul/14 with Nath Kitcher
First E3. tried 3 different nuts ( inc twisted ) and even a cam in the much mentioned slot but coudn't get any to fit. So finally clipped the thread!
hms - Lead O/S - 03/May/13 with Brian
bpmclimb - 2nd rpt - 03/May/13 with Helen S
Dave led first. Pulled ropes and led on his gear.
Ollie B - Lead β - 13/Oct/12 with D.Foster
Tim Sparrow - 2nd - 15/Sep/12 with Ned
3 Names - Lead rpt - 11/Aug/12 with Sumee Holloway
Gear is a bit crap in places. Got through a desent amount of brass offsets. The climbing is ok.
marcduhig - Lead O/S - 13/May/12 with Sexy Liz
Hidden - Lead O/S - 07/Apr/12
arb89 - TR O/S - Apr/12 with Dymph Kelly, Neil Stansbie
Goose4 - Lead O/S - 26/Mar/12 with Tom Adams
Went too far left, didnt spot nut slot (what i did wasnt E3)
tommytuffa - Lead O/S - 10/Jun/11 with Rich
Hidden - 2nd - 10/Jun/11
Placed a nut instead if clipping the thread (off route?) but it came out as I moved up...
ian d f - Lead O/S - 27/Mar/11 with Pete B
Hidden - Lead O/S - 15/Aug/10
Hidden - 2nd O/S - 15/Aug/10
It's not quite clear from the guidebook whether you're supposed to clip the in-situ thread or not. It describes it as "off-route further right", which would perhaps imply that it's out of bounds, and yet the same thread is referred to in the Motion Pictures description as being "on The Green Meanie". Perhaps it's being mentioned in passing as an option. I didn't use it; as the nut placements further left seemed just about adequate.
bpmclimb - Lead O/S - 17/Jun/10 with Clare
Good route, quite sustained and a bit bold though ultimately fairly safe. Clipped the tat on Motion Pictures as wasn't convinced by the nut.
Misha - Lead O/S - 09/May/10 with Ian W
Hidden - 2nd O/S - 22/Aug/09
Hidden - Lead O/S - 22/Aug/09
Neil Stansbie - TR - Apr/09
3 Names - Lead O/S - 2004 with Tim Hussain
Tim M - Lead O/S - 2000
liabilityliz - TR - 28/Jul/99 with Mark Trepte
RichardMc - 2nd - 27/May/92 with John Evans
ChrisJD - Lead - 16/Jun/90