The Mantis is the "classic belay device made better", say DMM, and with its lightness, smooth handling and secure feel on a wide range of rope diameters, it's hard to argue with them. Shaped like DMM's Pivot, but without the hinged addition that enables it to be used in direct belaying 'guide' mode, the Mantis looks at first glance pretty simple. In essence it may be based on a plain old tube; but once you start using it, the thought that DMM have put into the details soon becomes obvious.
Size and weight
Hot forged, and then milled with a computer-controlled cutter to add detail and strip out excess metal, the Mantis is both compact in size and impressively light, weighing just 45g. In comparison with rival devices roughly comparable in size and general design, the Petzl Verso weighs 57g, and the Black Diamond ATC-XP is 64g - not far off 50% heavier. A few grams here or there may not sound like much in the scheme of things, but it soon adds up, and anyone who is making an effort to reduce the weight of their hardware is going to appreciate the lengths DMM have gone to here. Though the weight of your belay device is arguably less of an issue for general cragging, when it comes to mountain routes - and particularly in winter - I've rapidly come to appreciate the lightness of the Mantis.
Basic geometry
To allow for an optimium balance of smooth handling and braking friction, the rope slots are subtly tapered. Extra friction is added by the deep v-shaped rope slots. Grooved for additional grip, these do a great job when you need to hold a fall, or when feeding out rope slowly and in control (lowering a climber, for instance, or abseiling). Meanwhile, the shape of the rear of the Mantis means it doesn't tend to jam against the screwgate, so when the leader needs a lot of rope in a hurry I find paying out is quick and smooth, not jerky or grabby like it can be with some devices. DMM's Technical Director David Noddings explains:
"When we talk about the 'rear' of the device, that's the opposite end to the grooves, so the bit by your belly when belaying. This aspect has a very important angle and radii that work with the outgoing (to the climber) rope to gently pull the device away from the biner (lift-off) to encourage/allow smooth paying out. Quite often this is overlooked in other designs, but it really is important: the devil is in the detail!"
Rope diameters and handling
Range:
- With a single rope: 8.5mm - 11mm
- With a pair of doubles or twins: 7.3mm - 9.2mm
Belaying in big gloves on a pair of 8.5mm winter ropes; wrestling with fat furry cables down at the wall; sport climbing on a range of ropes from 9.6mm - 10mm; cragging with half ropes; top roping kids; abseiling; classic mountaineering days with a single rope - pretty much whatever I've been up to over the last few months, the Mantis has been in use. Its geometry accommodates an impressive range of rope diameters, and in use it feels smooth taking in and paying out even on an ancient 11mm that I excavated from the bottom of the cupboard. On the other hand thanks to the tapered rope grooves, with their sculpted channels for extra friction, the holding power feels reassuring - and even on slick skinny ropes, I've always felt things were safely under control when belaying.
The 7.3 - 11mm range of the Mantis compares well with rival devices (the BD ATC-XP for instance is 7.7mm - 11mm, while the Petzl Verso is 7.5mm - 11mm). Since it suits more or less any rope size that the average climber is likely to encounter, this is pretty much the epitome of an all-round belay device.
Summary
OK, there's not a lot to it. But it's light, it offers loads of grip for secure belaying, and it works smoothly on a wide range of rope diameters... what's not to like? If you're after a simple, effective and versatile belay device - and if you don't require the option of a guide plate mode - then the Mantis has to be one of the best choices currently available. I take mine everywhere.
Comments