Hi Folks, my partner has a new Wahoo Kickr Turbo Trainer, her trainer bike has a ten speed drive train but the turbo trainer comes fitted with an 11 speed cassette.
Can I transfer the ten speed cassette off the trainer bike onto the turbo trainer or do I need to buy a 10 speed cassette from Wahoo to install onto the trainer?
Not used the Wahoo but I am pretty sure you need a small spacer to adjust the chain line when going from 11 speed to 10 speed on my trainer. I assume the freehubs are similar?
As above, the turbo should have come with a spacer so you can use any 10 speed cassette, spacers are are 1.8mm, they go on first then put the cassette on.
Yes, the trainer comes equipped with a 1.8mm spacer, so presumably I can install the 10 speed cassette currently on the back wheel of her trainer bike without having to buy a separate one from Wahoo?
Word of caution, the old cassette might not be a single component but may be a load of separate cogs and spacers. Remove with care ! Also be very careful not to cross thread the retaining nut when reassembling.
Apologies if I've just taught granny to suck eggs.
Gear News MPOWERD Luci Site Lights – Innovative "Stake" Lights.
Podcast Factor Two - S1 Ep.5: Sally Can Wait
Fri Night Vid Ethan Pringle on one of Portugal's Hardest Sport Climb
In this week's Friday Night Video, we follow Ethan Pringle to the 'not-yet-popular' but world-class sport crag of Meio Mango in Portugal. In the film, Ethan attempts one of the country's hardest lines, Filipinos, which was first...
Press Release Arc'teryx Alpine Academy returns to Chamonix-Mont-Blanc - July 4 – July 7, 2024