DMM Torque Nuts

Torque nuts are DMM's solution to large passive protection. As the name suggests, these cunningly sized and shaped nuts work well in standard placements but also have and efficient camming system. Just four sizes cover a very large size range. The colour coded double dyneema sling is protected on the top by a large countersunk groove and works in a similar fashion to the slings on our cams. This unique refinement makes a racking the units much easier and allows you to climb less encumbered.

Torque Nuts Set

See also Nutty Torque at the DMM website,

"Although Torque Nuts can be used as a wide wedge, their biggest advantage is based on the camming principle of the original hexes. Keeping the all important pivot points but with a modern redesign, we've developed a piece of passive protection kit that is immensely strong yet very light. Rated at 14kN this equates to holding approx a 1.4 tonne static load. Just four sizes cover a very large range and they are all anodised for recognition and corrosion protection..........." read more

Torque Nut

  • Size 1 (weight)54g, (strength)14kN, Green
  • Size 2 (weight)70g, (strength)14Kn, Red
  • Size 3 (weight)104g, (strength)14Kn, Gold
  • Size 4 (weight)146g, (strength)14Kn, Blue

Stockists: UK Stockists Here

x Read the UKC Review of the Torque Nuts

For more information visit the DMM site
Gear Forum 3 comments

This announcement has been read 11,133 times

Product News at UKC presents climbing, walking and mountaineering equipment posts that will be of interest to our readers. Please feel free to comment about the post and products on the associated thread.