UKC

Totem Cam

© Beta Climbing Designs

Beta Climbing Designs  © Beta Climbing Designs
Four individually loaded cam lobes obtain the best grip in every placement.

The Totem Cam's patented Direct Loading Camming Device system applies a perfectly equalized load directly onto each lobe, eliminating the risk of inactive lobes and therefore any outbalanced forces that might compromise cam placement stability. Where rock contact with four cam lobes is not possible, Totem Cam still offers the option to load just two lobes.

Totem Cam features everything you require of a cam for all-around use including:

Well-sized cam heads

The narrowest head width for the smallest sizes

Very flexible cam body

Easy handling even with hand gloves

 

  • Loadable on just two lobes.
  • Great holding power. Comparing with a regular Spring Loaded Camming Device system (system used by most other brands), Totem Cam is like a regular SLCD with approximately 13 degree cam angle combined with hard 7075-T6 aluminum lobes.
  • Less walking due to strong springs and good flexibility.
  • Good expansion range (1.64:1)
  • Light and durable.
  • Loadable on just two lobes.
  • Great holding power. Comparing with a regular Spring Loaded Camming Device system (system used by most other brands), Totem Cam is like a regular SLCD with approximately 13 degree cam angle combined with hard 7075-T6 aluminum lobes.
  • Less walking due to strong springs and good flexibility.
  • Good expansion range (1.64:1)
  • Light and durable.

For more information Beta Website



2 Jul, 2014
Link is dead.
2 Jul, 2014
Works for me

Product News at UKC presents climbing, walking and mountaineering equipment posts that will be of interest to our readers. Please feel free to comment about the post and products on the associated thread.
Loading Notifications...
Facebook Twitter Copy Email