We receive free products for review from brands, many of whom advertise on the site. We work on strict condition of editorial independence, and no guarantee of endorsement
Approach shoes are my go-to footwear when heading out cragging in summer or rock climbing in the mountains. They bridge the gap when it's too rough or boggy for bog standard trainers, but when a walking boot would be too heavy and cumbersome. While proper fell running shoes also offer a lightweight alternative to boots, a decent approach shoe will be better than either boots or running shoes for climbing and scrambling. Of course I probably end up using them most just for heading round the corner to the shops or down to the climbing wall. Finding a shoe that covers all these different uses can be hard, but the Boreal Sendai manages extremely well.
Uppers
The Sendai looks in many ways like a typical trainer - bright colours, stylish and something you would probably wear on a daily basis. But after putting them through their paces around the hills the thing I noticed most was the robustness of these shoes. Unlike a typical trainer they offer plenty of support on rough ground, and can certainly take a battering!
Materials used in the construction of the Sendai mean they feel slightly heavier than many other approach shoes (944g/pair - size 7 UK), but the flipside to this is their supportive and robust feel.
The upper main body of the shoe is made from 2mm split leather. This material I found to be very hard wearing and has excellent water repellency. Crossing a shallow stream on the way up Ben Ledi was no problem for the Sendai. The toe is fitted with a rubber cap offering that extra layer of protection and good friction on the rock.
Sole
Underfoot is a sole constructed using Vibram rubber along with EVA foam that provides shock absorption. On other shoes I've often found absorption foam to be too soft which results in the bending of the sole when edging. This is an area in which the Sendai really excels. The foam provides just enough cushioning comfort without affecting their performance on steeper terrain. A board-lasted construction also helps with the overall supportive feel. If you prefer a stiffer, edgey shoe for scrambles and easier climbs then the Sendai fits the bill well, and their Vibram rubber is really grippy on the rock too.
Fit
In terms of fit these shoes come in standard sizings, but will best suit a broader foot especially around the toe. Padding at the heel meant that it performed particularly well while edging, with almost no heel lift. The lacing system will also accommodate anyone with a relatively high instep.
Summary
The Sendai are a very decent all-round approach shoe. They are perfect for someone looking for a shoe they can wear around town, to the crag, out walking in the hills and even do a little climbing or scrambling in. The build quality is excellent and the materials used in the construction stand up well to hard wear. They are stiffer and heavier than many other approach shoes, but if you don't mind that then they can cross technical ground with grace. An excellent, beefy, supportive shoe.
What Boreal Say:
The upper is made from premium quality split leather with a padded and well ventilated PU Air Net lining for breathability and comfort. A rubber toe rand protects the upper from knocks and scrapes.
Unlike lesser approach shoes Sendai boasts a fully board lasted construction for excellent underfoot support and protection on rough ground. The full length midsole has an EVA top surface layer and this extra layer of cushioning directly under the foot greatly adds to the walking comfort. The Sendai features a Vibram® Password outsole in high friction MEGAGRIP rubber with self-adaptive lugs for superb traction and features a smooth climbing zone at the toe for optimum friction on rock footholds.
With the Rapid XT, walking comfort may come first, but on-the-rock performance is a close second. This is a capable approach shoe that feels like it's built to last, says Dan Bailey.
Supportive Approach Shoes
Lighter and more nimble than boots, more capable on steep rocky ground than a trail shoe, approach shoes are the all-terrain 4x4 of footwear. For UK mountain crags and scrambling, a supportive and robust model is preferable: Here we compare five of the best...
Tenaya Approach Shoes: Tenerife, Nes and Mojocar
From the beginning, Tenaya has always put 100% effort into developing the best possible product to help all climbers improve their performance. The same dedication to design can also be seen in our lifestyle footwear.
Boreal Flyers Mid
Robust, supportive, and with a decent all-terrain tread, the mid-cut version of Boreal's technical approach shoe is built to last, says Rob Greenwood, and should be a good investment for anyone seeking a more substantial option for mountain use in particular.
I would say the same thing about your boots though! My approach shoes weigh <400g, and while completely non-waterproof will dry quickly. I don't own any boots apart from my B3s for winter (and my rubber caving boots); I try and avoid boggy ground and I have used my approach shoes for scrambling, climbing easy mountain routes and (occasionally) approaching crags... I can see the advantages of boots for durability and waterproofing but that's not what I've ever really needed/wanted. I do find it amusing when you see people wearing them in Font, or somewhere like Dartmoor where its just wet slippery grass on the approach :P
Comments