Wild Country - New Friends Review

© Simon Verspeak

Released in 2016, Wild Country's New Friends are the result of several decades of gradual refinement on the iconic original. Featuring double axles, wide lobes, a thumb loop and an extendable sling, the latest design puts WC Friends on a par with the best cams currently available. Over the last year Simon Verspeak has put them through their paces on a wide range of rock types in the US, the UK and elsewhere in Europe. How did he get on?

If we were to give a prize to the single advance in equipment that allowed for the biggest rise in climbing standards, the award would surely go to the invention of the camming device. It was 1978 and Mark Vallance had produced a working prototype using a design from Ray Jardine. These were soon produced through the Wild Country brand. They were initially so secret that his climbing partners simply referred to them as 'the Friends'.

Sporting the full range  © Simon Verspeak
Sporting the full range
© Simon Verspeak

The constant 13.75 degree camming angle which was a fundamental to Ray's original blueprint is still used by Wild Country and some other manufacturers as the starting point today, since this angle gives consistent holding power across the range, meaning that it doesn't matter whether it's over cammed or under cammed - it'll still hold at full strength. Since the early days evolution has continued, with each brand adding their unique twist and raising the bar in terms of usability: fixed stems have become flexible; single axles have become double; cam lobes have widened; and slings are now frequently extendable. Perhaps uniquely, New Friends combine all these advantages.

I received a set of Wild Country's new Friends just before the 2016 summer rock season, allowing me masses of time for a comprehensive review of these cams across a variety of rock types and climbing situations, both personal and professional. When working as a climbing instructor I need the pro to be intuitive to place and remove, robust and confidence inspiring, and fumble-free. When climbing in my own time I want the same, sometimes just more urgently! New Friends tick all these boxes.

Size range

Across six units from size 0.5 to size 4, New Friends span from 20.6 - 112.1mm. Here's how they break down in range and weight:

Double Axles

These are the first camming unit that Wild Country has made with a double axle. Double axle designs are stronger, and they allow for a larger size range per unit. In practise this means that you can carry fewer cams and still fit a wide range of crack sizes. They can be used passively in a crack, and they are also extremely unlikely to invert or disform when in use, or when being transported.

Wild Country have added their own twist to this design with hollow axles (patent pending), which are stiffer but lighter when compared to a solid axle.

In terms of range, there's loads of overlap between each size. I found for the first time ever that I now routinely carry larger sizes. I have put that down to the fact that you can carry fewer of these and still get the same range of placement options, meaning I am happier putting a big size on even just in case because I have the extra capacity.

Wide Skimmed Lobes

The New Friends' Hot-forged cam lobes in a soft 6082 alloy are easy on the rock.

Some recent research explored the idea that anodising on the face of the cam lobe (i.e. the section which 'bites' into the rock) can reduce the holding power of the cam by slipping against the surface of the rock they are placed in. Since then, many of the major manufacturers have stopped anodising this section and many have added additional grooving. These New Friends have lobes that are 6mm wide on sizes 1-4 and 7mm on sizes 5-6, noticeably wider than the previous model. These are about 1mm wider than both the old Dragons and Camalots too. The biting edges have also had the anodizing machined off, meaning more friction and purchase on the rock.

After several months of good hard use these cams are now showing some roughing of the metal on the faces, but logically this only ought to add to the holding power. Having said all that I don't reckon I want to test this in a 'head to head jump off' test! If you worry that your older cams are anodised, the chances are that use has already worn some of this off.

Extentable slings and thumb loop

With the New Friend, Wild Country have built the first double axled cam unit that combines a thumb loop with an extendable sling. This combination is a big advantage for traditional climbers, giving you easy handling and more options in terms of placements. The UK market presents a distinct challenge to manufacturers; most UK trad routes follow a variety of features and wander about a fair bit. By contrast look at typical American routes, which tend to follow very consistent lines. With the option of a longer sling the New Friends fit into the wandering UK bracket very well. In addition the large size of the thumb loop makes them very easy to select and deploy and then to pull the sling through to clip.

Once placed in the rock, you can decide whether to extend or not; the soft and flexible 12mm dyneema sling is smooth to use. The short doubled loop of 9cm (12kn doubled) increases to 18cm (10kn extended) when pulled through, which in many circumstances saves you the need to clip a quickdraw into the cam as well. As a result you can often get away with carrying fewer quickdraws. And when you're in extremis, clipping straight into the sling is faster too, since you're not then reaching for a quickdraw.

I have heard it said that the design means they are not strength rated as highly as the heads on some other cams, the DMM Dragons for instance; however compared to a Dragon I found they are far easier to pull through and deploy. Wild Country say these have been extensively tested and by not crimping the wires there's no deformation of the loop. In practise the pull through is simple, and loading and even the odd fall hasn't shown any wear to the loop.

Trigger and stem

The floating triggers are made of chunky although not bulky plastic, stippled on the edges where your fingers sit to add grip. The pull is smooth, with a slight resistance from the springs which is nice to feel in your hand. The ergonomics of the design have been well considered. For use with smaller hands, for instance, the modest length between the thumb loop and the trigger means no big stretch, allowing a reduction in fatigue. I found the hand position felt very powerful.

The trigger wires are good and robust with no signs of wear even after a summer of use.

Andy Kirkpatrick features 'reach' on his top five list of what makes the perfect cam. Head to head New Friends have the longest stem when compared to BD Camalots and DMM Dragons, allowing you to stretch that bit further when placing them - a very useful feature.

Friends in action on Pigeon Rock, The Mournes  © Simon Verspeak
Friends in action on Pigeon Rock, The Mournes
© Simon Verspeak

Testing them out at Red Rocks, Nevada  © Martina Zandonella
Testing them out at Red Rocks, Nevada
© Martina Zandonella

Weight saving

I found the actual weight of the units to be very close to advertised, with some units actually a few grams less. The hollow axles, size range and extendable slings all allow further weight to be shaved off your harness.


  • User friendly
  • Good size range
  • Nice colours
  • Stable once placed
  • Easier ergonomically
  • Spring pull feels 'solid'
  • Easy to unsling
  • Trigger, sling and loop all 'big' size which reduces the fumble effect


  • The only negative I have found whilst using is over-camming them. Because of the powerful position your hand is in they are very easy to over cam into position. This has happened more frequently with the largest sizes, which is interesting because I found that over camming is often a result of a bad visualization of the size of the crack and following selection of the correctly sized device which is easier with bigger sizes! Thankfully my seconds have been able to remove them, but on a couple of occasions only with sitting on the rope and several minutes of jiggling. As a result I have carefully briefed clients and friends on this issue on first use, and on the whole with awareness this problem has been reduced.


    Wild Country say the new Friends are "the only twin axle cam that combines the convenience and comfort of a thumb loop with the speed and utility of an extendable sling" and in use, this combination of thumb loop and extendable sling is a major advantage. I've found the ergonomics reassuring; they fit the hand in a very natural position and feel substantial without feeling chunky or bulky. Being a poor (if mainly through avoidance!) crack climber, I need to feel confident that the protection I place is quick and effective; these felt easy to place and with a reassuring 'bite'.

    Over the last year I've subjected them to a significant amount of use on different types of rock (grit, dolerite, rhyolite, quartzite, sandstone, limestone, granite and possibly more) across the UK, in the US and in Europe, plus I have used them with all my clients. Both clients and friends have found these cams easy to use, and they have fast become our favourite. They have frequently found themselves on my mountaineering rack too.

    If you are looking for one set of camming devices to use on British style trad routes, I don't think you could go far wrong with the New Friends. If I hadn't been given a set to review I'd certainly buy some!

    Wild country say:

    The new Friend is the only twin axle cam that combines the convenience and comfort of a thumbloop with the speed and utility of an extendable sling. Faster, smoother, lighter in use and superbly finished; our clever combination of key features with innovative engineering makes the new Friend the most complete cam available.

    • Original 13.75° camming angle
    • Twin axle has allowed increased range per unit
    • Consistency of overlap between units
    • Hollow axles are stiff
    • Hot forged cams
    • High friction machined cam faces
    • Wide rock-friendly cam lobes
    • Ergonomic floating trigger design
    • Trigger stop
    • Thumb loop with injection moulded ergonomic thumb stop
    • 12mm Dyneema extendable sling with directional pull indicators
    • Price: £55 - £80

    For more info see

    Simon Verspeak headshot  © Simon Verspeak

    About Simon Verspeak

    Simon is a super keen climber, skier and mountaineer who works full time as a mountain instructor. He runs the small business of OranjeBergsport, providing bespoke skills for mountain adventuring and also freelances for a number of bigger organisations such as the Miltary and Jagged Globe. He is nominally based in North Wales, but also works in the Peak, Scotland and worldwide on expeditions.

    Support UKC

    As climbers we strive to make UKClimbing the kind of website we would love to visit, with the most up-to-date news, diverse and interesting articles, comprehensive gear reviews, breathtaking photographs and a vast and useful logbook system. As a result, an incredible community has formed around the site - we’ve provided the framework but it’s you who make the website what it is today. If you appreciate the content we offer then you can help us by becoming an official UKC Supporter. This can be a one-off single annual payment or a more substantial payment paid monthly or yearly which includes full access to Rockfax Digital and discounts on Rockfax print publications.

    If you appreciate UKClimbing then please help us by becoming a UKC Supporter.

    UKC Supporter

    • Support the website we all know and love
    • Access to a year's subscription to Rockfax Digital.
    • Plus 30% off Rockfax guidebooks
    • Plus Show your support UKC porter badge on your profile and forum posts
    UKC/UKH/Rockfax logo

    14 Jul, 2017
    Given the hollow stems are'stiff', do they permanently deform if they are loaded over an edge? Steve
    14 Jul, 2017
    Axles are hollow, not the stem. The stem is cable.
    14 Jul, 2017
    I have to say I'm not that bothered by thumb loops. They seem to me a solution to a problem that never existed. I mainly use Dragons but have a couple of 2014 model Friends with loops. I don't find them any easier or harder to handle, and I'm missing a couple of smaller fingers so dexterity is probably all the more important to me! I also think WC are missing a trick by only having six sizes. No small sizes limits their appeal.
    14 Jul, 2017
    So WC and DMM make cams for Black Diamond now? Because you know, they're basically all the same these days. Black Diamond obviously came up with the best cam design decades ago in their eyes.
    14 Jul, 2017
    0.4 is coming out this year. Below that single axle makes far more sense due to strength issues with the cam lobes. The author is mistake when he says that double axle cams are stronger - that is simply incorrect - I know I shouldn't argue with him and all, but the reality is that double axle design means you have a large hole just where you need material, added to which the forces are not counterbalanced through the axle, which is why they need a plate at the end of the axles strapping them together. Stiffness in the axls is somewhat of a good thing in this case as the cams become loaded excentrically as the axles bend due to the forces and initiate a buckle in the lobes. As there is no material in the middle of them, that force needs to be directed through the metal at either ends of the slot which becomes the major failure point of a double axle cam lobe. As size decreases, axle size does not decrease as rapidly as you need it to meaning that material gets thinner and thinner and so it was felt we would rather deliver something which just hankers after market share we would go for high strength as far as we could. It's in suboptimal placements that you will especially see this - backed out placements where the cam is placed in the wrong orientation when you will see a lever arm effect caused by loading the stem and which will snap a cam lobe like a carrot. Hence one of the reasons we have gone for as wide a lobe as we can to counteract some of these forces.
    More Comments

    Loading Notifications...
    Facebook Twitter Copy Email LinkedIn Pinterest